Best made-to-measure Fabric louvers

Fabric louvers

[ver/f89/f127]

product available

Fabric louver vertical blinds are a frequent choice for office windows - this is because they are practical, offer great light and privacy control and can be bulit to large sizes. These blinds do not have front or back side therefore you can fit them with side cords controls either on the left or on the right hand side - while ordering you decide only which side - same, opposite, middle or split - should the louvers stack when pulling cord.
MEASURING: If you are planning to fit your vertical blind inside recess please deduct a few mms [eg 4mm each side] from the window recess width so that there is enough space to fit the blind into it. For the drop of the blind always deduct 1-1,5 cm off the fitting height - the louvers need space at bottom to hang freely above floor/window ledge!
WE MAKE ALL BLINDS INC VERTICALS TO THE EXACT MEASUREMENTS YOU SUPPLY IN ORDER.

NOTE: Vertical blinds can be easily joined in the middle of the window to form a larger but uniform blind; of course, 2 joined blinds will have their own controls at sides but the louvers will ovellap perfectly at the joint in the center. Therefore if you require to cover a window that is eg 3800mm wide please order 2 verticals each at 1900mm and tell us in order comments that these will form one blind.

Approximate production time for fabric louvers: from 9 to 12 working days. + Shipped in 2-4 days, see: Shipping

min/max dimensions for fabric louvers are:

width: minimum 300 mm -- maximum 4000 mm
drop: minimum 300 mm -- maximum 4000 mm

Max SURFACE MANUAL = 16 sq meters

approximate size of stack for fabric louvers:

500 mm width will produce 98 mm stack of louvers for fabric louvers when fully opened - [ this equals 19.6 % of the blind's width. ]

Installing your blinds yourself is as easy as anything else. Even if you have never had a tool in your hand you will be able to mount your blinds in place correctly. All mounting brackets are included. We will enclose installation tips with your order.
We are positive you will do alright with the fitting job -- but even if you decide to ask help from a friend or a specialized company -- we are sure it will eventually cost you much less than buying from a traditional blinds company.

Vertical Blinds - download instruction in adobe acrobat file

Louver Width:

Approximate Size of Stack	CLEARANCE	blind width

	C = mm

		B = mm

Accurate measuring is the most important step when buying window blinds on the net. It is for this reason that it is also the step that causes the most anxiety. --- RELAX --- if you can read a ruler and you follow the instructions below - you'll do alright.
Note: Your blinds are made to the specifications you provide. If you make a mistake here there is no refund or return policy to protect you. If the blind is made too large it can be cut down for you for a fee. If the blind is too small you will need to order a new blind. So accuracy and precision is a must.

INSIDE MOUNT

BLINDS WIDTH
Measure the exact width (left to right) of the window recess in three places (top, middle and bottom). Take the smallest of the three measurements. This is the width of the recess. For your blinds width you must make a deduction of suggested minimum of 10 mm off the recess width to allow for smooth blind operation and/or mounting brackets.*** (You will get a tiny 5 mm gap on each side of the fitted blind) It is reasonable, safe, practical and sometimes looks better to make a greater deduction [14-20mm per blind - 7-10mm each side] for large 50mm wooden or aluminium blinds and for wooden shades. Practical note: the width is always the first size in blinds or shades measurements.
BLIND DROP
Measure the exact height (top to bottom) from the top recess edge down to the window sill in three places. Take the largest of the three measurements. Practical note: the drop is always the second number in blinds or shades measurement.
*** it does not apply to vertical blinds - see top of product page.

IMPORTANT: YOU MAKE DEDUCTIONS FOR INSIDE MOUNT YOURSELF. WE WILL NOT MAKE ANY DEDUCTIONS ON ANY INSIDE MOUNT BLIND OR SHADE. WE MANUFACTURE TO YOUR EXACT MEASUREMENTS!
Please, make sure that your window recess is deep enough for inside mounting of the blind type you are ordering.

*** as the fabric is always narrower than the blind there is no need to make a similar deduction for roller blinds; it is enough to deduct 2-4mm off the width of the recess to make sure that the roller blind fits well into it.

OUTSIDE MOUNT

BLINDS WIDTH
Measure the exact width (left to right) of the window frame or how wide you would like the blind or shade to be. Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 1250 mm, it might be helpful to order 1350 mm. This will provide 50 mm coverage on each side of the window. There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening. Remember: the width is always the first size in blinds or shades measurement.
BLIND DROP
Measure the height you would like the blind or shade to be by measuring top to bottom. When measuring the height take into account the required space for the mounting bracket, a flat surface of a minimum 70mm is required. This will prevent light leakage at the top as well. We recommend adding to this number a minimum of 50-70 mm for the bottom to insure maximum light coverage and to cover the window completely. The overlap at the bottom of the blind is only limited by the floor but please take into account obstacles such as radiators. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.

IMPORTANT: THE FACTORY WILL MAKE NO DEDUCTIONS ON OUTSIDE MOUNT BLINDS OR SHADES.

IMPORTANT CONCLUSION: Irrespectively of the option chosen for your blinds - OUTSIDE or INSIDE - the blinds supplied by ClickforBlinds.com ARE MANUFACTURED TO THE EXACT MEASUREMENTS SUPPLIED IN YOUR ORDER.

Print customized table to write the measurements for your blinds show table

Fabric louvers

Colour

Louver Width

Louvers Stack Position

Mounting Brackets

Not for windows opening inwards.

Child Safety

Fitting height

Liability declaration

Controls Length

Summary

INSIDE MOUNT

OUTSIDE MOUNT