50mm RETRO aluminium made-to-measure blinds

Width:

Drop:

500 x 1000 mm

€ 88.04 Inc VAT

Colour preview
Sample window
(1000 x 1300mm)

Colour

Colours viewed on your monitor may differ from the real blind colours. Order samples prior to ordering blinds if exact colour is important to you.

white

+20%

white PERF

off-white matt

+10%

snow matt

alabaster matt

stone white

oyster

honey dew matt

+20%

honey dew PERF

beige

antique white matt

brown matt

mocha metallic

red matt

blue matt

navy blue matt

light grey matt

atmosphere

silver matt

silver metallic

+20%

silver metallic PERF

silver stardust

grey metallic

grey matt

antracite matt

+10%

carbon

black matt

black

+20%

black matt PERF **out of stock till further notice

Samples order page

Preview full-sized images

Colour preview

Sample window (1000 x 1300mm)

Cloth Tape Colour

25mm

10mm

38mm

use string ladder

Cloth Tape Colour 25 mm

white

snow

ivory

beige

sassafras

mocca

sand

dark beige

linen

taupe

light olive

olive

light green

green

light blue

blue

indigo

light violet

violet

terracota

dark red

parsimmon

cardovan **out of stock till further notice

light chocolate

chocolate

rhino

walnut

coffee

cacao

brown

light grey

wenge

dark grey

antracite

black

+12%

limestone wave

+12%

cacoa wave

+12%

mist wave

+12%

clay wave

Cloth Tape Colour 10 mm

white 10

snow 10

ivory 10

beige 10

mocca 10

sand 10

dark beige 10

linen 10

taupe 10

light chocolate 10

chocolate 10

rhino 10

walnut 10

cacao 10

wenge 10

light grey 10

dark grey 10

antracite 10

black 10

Cloth Tape Colour 38 mm

+5%

white 38

+5%

snow 38

+5%

ivory 38

+5%

beige 38

+5%

mocca 38

+5%

sand 38

+5%

dark beige 38

+5%

linen 38

+5%

taupe 38

+5%

light olive 38

+5%

olive 38

+12%

green 38

+5%

light blue 38

+5%

light violet 38

+5%

violet 38

+5%

terracota 38

+5%

light chocolate 38

+5%

chocolate 38

+5%

rhino 38

+5%

walnut 38

+5%

coffee 38

+5%

cacao 38

+5%

wenge 38

+5%

light grey 38

+5%

dark grey 38

+5%

antracite 38

+5%

black 38

+5%

white herring grey 38

+5%

white herring beige 38

+5%

white herring black 38

+5%

black herring white 38

+5%

black herring silver 38

+17.5%

impresión beis 38

+17.5%

impresión gris 38

+17.5%

impresión negro 38

+17.5%

puntada blanca 38

+17.5%

puntada marrón 38 **limited supply

+17.5%

líneas marrones 38

+17.5%

líneas rojas 38

+17.5%

líneas grises 38

+17.5%

líneas negras 38

+7.5%

silky grisclaro 38 **limited supply

+7.5%

silky acero 38

+15%

oak crepe 38

+15%

mist crepe 38

+15%

ash crepe 38

Child Safety

yes

Fitting height

WARNING

Young children have been strangled by loops in pull-cords, chains and tapes, and cords that operate the product,
To avoid strangulation and entanglement, keep cords out of the reach of young children. Cords may become wrapped around a child’s neck,
Move beds, cots and furniture away from window covering cords,
Do not tie cords together. Make sure cords do not twist and create a loop,
To reduce the risk of accidents please use the safety device provided.

Fitting Height from the floor:

Summary

Aluminium Blinds 50mm RETRO

Reference

Approximate Weight: 1.3 kg

Approximate Size of Stack:

143 mm (14.3%)

Approximate Production Time: 5 - 6 working days + Shipping

Approximate production time for aluminium blinds 50mm RETRO: from 5 to 6 working days. + Shipped in 2-4 days, see: Shipping

min/max dimensions for aluminium blinds 50mm RETRO are:

width: minimum 400 mm -- maximum 2720 mm
drop: minimum 500 mm -- maximum 4000 mm

Max SURFACE MANUAL = 6 sq meters

approximate size of stack for aluminium blinds 50mm RETRO:

1000 mm drop will produce 143 mm stack for aluminium blinds 50mm RETRO when raised including the headrail - [ this equals 14.3 % of the blind's drop. ]

Aluminium 50mm retro blinds are a special collection of aluminium blinds with a unique retro mechanism instead of standard one. They combine lightness and neatness of aluminium slats with retro system made mostly from wood. You can choose different colours for both components depending on your interior style – full customization is possible!

Blinds are fully made-to-measure and you can select numerous additions such as colour of the mechanism or plinth.

Installing your blinds yourself is as easy as anything else. Even if you have never had a tool in your hand you will be able to mount your blinds in place correctly. All mounting brackets are included. We will enclose installation tips with your order.
We are positive you will do alright with the fitting job -- but even if you decide to ask help from a friend or a specialized company -- we are sure it will eventually cost you much less than buying from a traditional blinds company.

50mm Aluminium Blinds RETRO - download instruction in adobe acrobat file

top fix

special face fix

Cloth Tape Colour:
Approximate Size of Stack -		- blind drop
CLEARANCE -

	C = mm

		B = mm

Accurate measuring is the most important step when buying window blinds on the net. It is for this reason that it is also the step that causes the most anxiety. --- RELAX --- if you can read a ruler and you follow the instructions below - you'll do alright.
Note: Your blinds are made to the specifications you provide. If you make a mistake here there is no refund or return policy to protect you. If the blind is made too large it can be cut down for you for a fee. If the blind is too small you will need to order a new blind. So accuracy and precision is a must.

INSIDE MOUNT

BLINDS WIDTH
Measure the exact width (left to right) of the window recess in three places (top, middle and bottom). Take the smallest of the three measurements. This is the width of the recess. For your blinds width you must make a deduction of suggested minimum of 10 mm off the recess width to allow for smooth blind operation and/or mounting brackets.*** (You will get a tiny 5 mm gap on each side of the fitted blind) It is reasonable, safe, practical and sometimes looks better to make a greater deduction [14-20mm per blind - 7-10mm each side] for large 50mm wooden or aluminium blinds and for wooden shades. Practical note: the width is always the first size in blinds or shades measurements.
BLIND DROP
Measure the exact height (top to bottom) from the top recess edge down to the window sill in three places. Take the largest of the three measurements. Practical note: the drop is always the second number in blinds or shades measurement.
*** it does not apply to vertical blinds - see top of product page.

IMPORTANT: YOU MAKE DEDUCTIONS FOR INSIDE MOUNT YOURSELF. WE WILL NOT MAKE ANY DEDUCTIONS ON ANY INSIDE MOUNT BLIND OR SHADE. WE MANUFACTURE TO YOUR EXACT MEASUREMENTS!
Please, make sure that your window recess is deep enough for inside mounting of the blind type you are ordering.

*** as the fabric is always narrower than the blind there is no need to make a similar deduction for roller blinds; it is enough to deduct 2-4mm off the width of the recess to make sure that the roller blind fits well into it.

OUTSIDE MOUNT

BLINDS WIDTH
Measure the exact width (left to right) of the window frame or how wide you would like the blind or shade to be. Make sure to measure wide enough as to cover the entire window and provide maximum light gap coverage. Example: If the window opening is 1250 mm, it might be helpful to order 1350 mm. This will provide 50 mm coverage on each side of the window. There is no rule on the width of blinds other than to make sure that it is wide enough to cover the opening. Remember: the width is always the first size in blinds or shades measurement.
BLIND DROP
Measure the height you would like the blind or shade to be by measuring top to bottom. When measuring the height take into account the required space for the mounting bracket, a flat surface of a minimum 70mm is required. This will prevent light leakage at the top as well. We recommend adding to this number a minimum of 50-70 mm for the bottom to insure maximum light coverage and to cover the window completely. The overlap at the bottom of the blind is only limited by the floor but please take into account obstacles such as radiators. Please make a note that some windows have trim that might interfere with mounting so it's important to measure above the trim if this is the case.

IMPORTANT: THE FACTORY WILL MAKE NO DEDUCTIONS ON OUTSIDE MOUNT BLINDS OR SHADES.

IMPORTANT CONCLUSION: Irrespectively of the option chosen for your blinds - OUTSIDE or INSIDE - the blinds supplied by ClickforBlinds.com ARE MANUFACTURED TO THE EXACT MEASUREMENTS SUPPLIED IN YOUR ORDER.

Print customized table to write the measurements for your blinds show table

Aluminium blinds 50mm RETRO

Colour

Colour preview

Wood Color

Cloth Tape Colour

Cloth Tape Colour 25 mm

Cloth Tape Colour 10 mm

Cloth Tape Colour 38 mm

use string ladder

Extra Tape (optional)

Tilter & Lift Cord Location

Bottom Rail Fixing (optional)

Color Mechanism

Mounting Brackets

Not for windows opening inwards.

Fixing Screws

Screwdriver Bit

Plinth (optional)

Child Safety

Fitting height

Liability declaration

Summary

top fix

special face fix

INSIDE MOUNT

OUTSIDE MOUNT

top fix

special face fix

Similar Products

Bamboo venetian blinds 50mm RETRO

Wooden blinds 50mm RETRO

Bamboo venetian blinds 65mm RETRO

Aluminium blinds 50mm ELEGANCE